| mike688 |
Hi, Just about to service and clean my brakes out. Just wondering if anyone has a torque list for the bolts that all the calipers and the bolts the hold the rest of the bracket on. If someone has the list i would appreciate it.
Mike |
|
|
| jay |
| This thread appears to have the torque settings you're looking for. |
|
|
| mike688 |
| Hey Jay, that torque listed on that link is just for the bolts on the caliper only. What about the bolts the hold the bracket that the brake pads sit on, they bolt on to the hub or whatever u called that. What torque setting should be used on those bolts the 14 mm bolts. |
|
|
| Sunday Rider |
Hey Mike,
The bolt that holds the caliper to swing it up is at 27lbf.ft(37N.m, 3.8kgf.m). This is what you move out of the way to get at the pads. I used a bungie cord to hold it up in the damper spring.
Good luck. Take your time, and have lots of light. |
|
|
| mike688 |
Thxs, Guys
But that torque setting is just for the caliper bolts, what is the torque setting for that actual bracket where the brake pads seat on. The bracket is bolted to the hub or whatever its called. |
|
|
| Rapid Rob |
| Caliper FRAME to knuckle (17mm head) bolt torque is 80lbs. |
|
|
| mike688 |
| Thxs Rapid Bob , for the fast reply. I really appreciated |
|
|
|
