| kingpilot06 |
ok, i've searched the forums for rims with a +15mm offset and came up with nothing. i know (or at least i think i know) that the 06 pilot lx's factory offset is 45mm. will a +15mm offset work without a problem? here are the rim specs:
20" x 8.5"
5 x 114.3 mm lug pattern
+15 mm offset
if these rims will work, i will get tire size 255/45/20
option #1 check them out here
or......
this is option #2 (i think the specs on these are perfect, but correct me if i'm wrong):
here
poll....which one does everyone like? i have a 06 sage brush pearl.
i personally like option #1, but its too hard to tell since its not mounted onto the pilot (and the offset issue).:bling: |
|
|
| ictvuser |
quote:
Originally posted by kingpilot06
will a +15mm offset work without a problem?
Check out rondog's 20in setup. His offset was +40mm. With only a +15mm offset, your wheels/tires will stick out a bit. Make sure the wheel is hub centric and has a center bore of at least 64.1
http://www.hondapilot.org/forums/sh...&threadid=13846
Don't know if you already asked the sellers the following questions:
What is the load rating?
How much does the wheel weigh?
Have the wheels gone through certification? (TUV, SFI, JWL, VIA)? |
|
|
| knonies |
| I don't know about rim offset or anything like that, but the size is the same I have on mine and option 1 looks almost exact to what I have. |
|
|
| kingpilot06 |
quote:
Originally posted by knonies
I don't know about rim offset or anything like that, but the size is the same I have on mine and option 1 looks almost exact to what I have.
cool...thanx for the pic. those are 20"? |
|
|
|
