| SiriusHog |
| i have an '03 Pilot EXL. the passenger side head light has condensation and sometimes has water actually standing in the bottom of it... my honda dealer said it isnt a warranty.. any ideas? car has 50,000 miles. |
|
|
| humanoid |
| Your warranty should cover that I would think, if it hasn't expired yet. Try a different $tealer and get a second opinion on that. |
|
|
| SiriusHog |
| i checked with 2 local dealers, both said the same thing.. and they want 230 freaking dollars for the part... |
|
|
| john802 |
| Do you have extended warranty? Try checking the rubber boot cover in the back of the headlight in question to see if its installed properly. |
|
|
| SiriusHog |
| whats funny is that its been outrageously hot here the last month or so, and it hasnt rained a drop.. and the thing wont dry out.. it just stays wet.. |
|
|
| SiriusHog |
| by the way, greetings from arkansas.. this website is great.. |
|
|
| Rapid Rob |
Yea, I got an idea.
Fix it.
Remove bumper (easy), remove h/light. Take the bulb out & rig the hole to pressurize the inside w/compressed air. Make sure that the air going in can get out so you don't damage it w/too much pressure. Spray soapy water all around the outside, paying close attention to the seams. The leak should be visible.
Silly cone is junk, I don't use it. Use a professional body seam sealer. Maybe NAPA has it?
Make sure the bonding area is scraped clean & dry. Maybe use some #80 grit.
Or buy a new one... |
|
|
| SiriusHog |
| you have to remove the bumper?? |
|
|
| Sportymonk |
| If you buy a new unit, check our sponsor Hondacuraworld.com. Good prices. |
|
|
| SiriusHog |
| does anyone have a link to something that tells you the steps to taking off the bumper? i know i need to take it off to replace the headlight.. |
|
|
|
