| DonP |
Our door got dented right on the body line just in front of the door handle. Dent Dude said he could do it. But I can save some bucks by removing the door panel and door handle myself.
I removed the door panel. But now I need to remove the outside door handle. I can't get to the rear bolt (near the lock). it looks like I need to remove the white plastic piece that retains the lock first.
I figured I check here to see if anyone has some tips or instructions before I do some unnecessary work or get myself in trouble. |
|
|
| 07_Nimbus_EXLN |
I wish I could see it.
But, I recently replaced a Civic door handle for a friend. You have to remove 2 10mm bolts, there's usually access holes in the door to make it a straight shot with an extended socket.
Also, there was a PIA clip to remove once the bolts were out, it slid down and out, then the handle came off.
You also know how to disconnect the linkage: simply unclip by turning, then the rods for the lock and door actuator will pull out.
That's the best advice I can give without seeing it.
On the Civic: My buddy at work broke the handle, and the dealer quoted him ~$170 to replace it. I got one on eBay for ~$30, painted and clear-coated it with rattle can paint, and got a free dinner out of it, and he still saved over $100. It was silver, and actually matched well because of the curves of the handle. |
|
|
| DonP |
quote:
Originally posted by 07_Nimbus_EXLN
I wish I could see it.
But, I recently replaced a Civic door handle for a friend. You have to remove 2 10mm bolts, there's usually access holes in the door to make it a straight shot with an extended socket.
Also, there was a PIA clip to remove once the bolts were out, it slid down and out, then the handle came off.
Thanks. I can get to the second (rear) 10mm bolt but there's aother piece in the way that won't let the socket slide on. If I dissamble it, I may not be able to get it back together because of it's awkward positioning. There is an access hole but the glass rail is in the way too.
quote:
Here is a schematic diagram from the parts book of the Handle or rather Hundle as they are known on HP.org
http://www.hondaautomotiveparts.com...RONT+DOOR+LOCKS
Thanks. |
|
|
| DonP |
| If anyone has specific instructions, I still need help on this. |
|
|
|
