HONDA PILOT .ORG
hondapilot.org HONDA PILOT .ORG Archive > General > Accessories
 
Missing Fog Lights pieces - will it still work? - Click HERE for Original Thread
onu2002
I ordered the fog lights w/o lower trim for my 03 Pilot, part #08V31-S9V-110, but received part #08V31-S9V-111. There are a few pieces, namely:

1 ~ Washer-bolt
2 ~ Flange nuts
1 ~ Unit bracket (I did receive a bracket, but it's different than the drawing. See attachment.)
1 ~ Wire tie with holder

(see link in next post)

I emailed Bernardi, and Andrew replied that Honda changed the part # from 110 to 111, so I received the right thing.

I should be able to find the washer-bolt and flange nuts locally, and could probably work around the missing wire tire with holder, but.....

Will the unit bracket that I received work?

thanks,
tom
onu2002
Fog Lights w/o Lower Trim Installation Instructions
sblvro
you don't need an extra bolt or nut. the relay switch attaches to the top square part(your pic). you can use an existing bolt to connect the left (hole) on the chassis. I got the same pieces you have and it worked out fine.
onu2002
Okay, great. Thanks for the quick reply!

Powered by: Search Engine Indexer and vBulletin v2.3.2
Copyright © 2000 - 2002, Jelsoft Enterprises Limited
Copyright 2000 hondapilot.org. All Rights Reserved.