HONDA PILOT .ORG
hondapilot.org HONDA PILOT .ORG Archive > General > General Discussions
 
Moisture in Headlight housing - Click HERE for Original Thread
whitefl
Hi Guys

My 05 Pilot has some moisture in the curb side headlight housing. Anyone have any tips on how to remove?

TIA
charly
try keeping your lights on for a fiew minutes.
oviphagy
take the bulbs out and get a hair dryer and blow hot air in the back for a bit.
whitefl
quote:
Originally posted by oviphagy
take the bulbs out and get a hair dryer and blow hot air in the back for a bit.


Thanks Rides I'll give it a try.
StarBlazer
You can just take a hair dryer and blow it on the outside of the housing also. However this will be a temporary fix. The condensation will return. A seal is broken allowing moisture to get in.
whitefl
Hi folks

Just to follow up, the hairdryer technique worked well. Parked the Pilot so the headlamp was in the sun to get as much "solar help" as possible. 1/2 hr of hair dryer on lowest setting did the job.

Sooner or later, will have to pull the housing and reseal it, I'm sure.



quote:
Originally posted by oviphagy
take the bulbs out and get a hair dryer and blow hot air in the back for a bit.

Powered by: Search Engine Indexer and vBulletin v2.3.2
Copyright © 2000 - 2002, Jelsoft Enterprises Limited
Copyright 2000 hondapilot.org. All Rights Reserved.